How to get the remote control of the aircraft
In the past 10 days, the hottest discussions on drones and remote control devices across the network have continued to rise, especially since novices have a lot of questions about the pairing operation of aircraft remote controls. This article will analyze the remote control pairing steps in detail based on recent hot topics, and attach structured data for reference.
1. Recent hot drone related topics
| Ranking | topic | Popularity index | Main discussion platform |
|---|---|---|---|
| 1 | DJI Mini 4 Pro new firmware upgrade | 92,000 | Weibo/Bilibili |
| 2 | New drone regulations and operation certificate examination | 78,000 | Zhihu/Tiktok |
| 3 | Remote control signal interference case | 64,000 | Tieba/Quick Shou |
| 4 | Third-party remote control compatibility test | 51,000 | Cooan/WeChat Community |
2. Mainstream remote control pairing method
According to the latest instructions of DJI, Daotong and other manufacturers, the matching process of mainstream drone remote controls in 2023 is as follows:
| brand | Pairing button position | Indicator status | time consuming |
|---|---|---|---|
| DJI Series | Inside the battery compartment | Red and blue flash alternately | 15-30 seconds |
| Daotong EVO | Remote control back | Green always bright | 10-20 seconds |
| Harborson | The rear of the fuselage | Yellow flash | 25-40 seconds |
| Beast 3 series | Remote Control Side Key | RGB Circulation Breathing Light | 8-15 seconds |
3. Detailed pairing steps (taking DJI as an example)
1.Preparation: Ensure that the power of the aircraft and remote control is >50%, remove the propeller to ensure safety
2.Enter pairing mode: Press and hold the remote control C1+C2+ video key at the same time for 3 seconds, release after hearing the "beep" sound
3.Activate aircraft pairing: Quickly press the power button 4 times, and observe the status light to change to marquee mode
4.Complete the connection: When the remote control displays "Connected" and the aircraft sends a confirmation sound effect, it means success
4. Frequently Asked Questions
| Problem phenomenon | Possible Causes | Solution |
|---|---|---|
| Unable to search for the device | Firmware version mismatch | Upgrade to the latest firmware |
| Frequent disconnection after pairing | Signal interference | Replace the 2.4GHz band |
| The indicator light is abnormal | Hardware failure | Contact the official after-sales service |
| The remote control is not responding | Key combination error | Re-read the instruction manual |
5. Things to note
1. Some countries and regions have special restrictions on the drone frequency band, and local regulations need to be checked in advance
2. The new regulations in 2023 require drones above 250g to be bound to real-name information to be activated
3. It is recommended to reset the remote control before first pairing: press and hold the photo key + gimbal pulsator at the same time for 5 seconds.
4. The third-party remote control may have functional castration, and the original accessories are best compatibility
From the above structured data, we can see that although the pairing process of the drone remote control is slightly different due to brand differences, the core logic is the same. It is recommended that users keep the equipment spacing less than 1 meter during operation and avoid interference sources such as WiFi routers. If multiple attempts still fail, try using USB cable direct connection for wired pairing mode.
check the details
check the details
en
